Dell E2216H - Full HD IPS Monitor | bol (2024)

FAQs

What is the resolution of the Dell E2216H monitor? ›

Dell E2216H 22" 1080p (1920 x 1080 at 60 Hz) Widescreen LED Monitor w/Stand.

Check the video port on the computer, the monitor, and the video cable if they are damaged or the pins are bent. If there is no damage, reconnect the monitor to the computer. Or, if you have another video cable, try connecting the two devices using the new cable.

1 AC power connector To connect the monitor power cable. 2 Displayport connector To connect your computer to the monitor using a DP cable. 3 VGA connector To connect your computer to the monitor using a VGA cable. 4 Dell soundbar mounting slots To attach the optional Dell Soundbar.

Click Start, type “Display” in the Search box and select “Display” when it appears in the search results. From here, you can change the resolution, icon and font sizes and change the dots per inch (DPI). Understand, however, that these are per-user settings and will only apply to the currently logged-on user.

Type Display Settings in the search bar from the Start Menu in the lower-left corner of your screen. Click to open. Scroll down to the Scale and Layout section and look for the resolution drop-down box. Make note of the resolution listed.

Check the physical connections: Ensure that the HDMI cable is securely connected to both your computer's graphics card (or motherboard's HDMI port, if available) and your monitor's HDMI input port. You can try disconnecting and reconnecting the cable to ensure a proper connection.

An HDMI port can only connect to one screen, but DisplayPort features Multi-Stream Transport (MST) for multiple screens and daisy-chaining. DisplayPort can connect to four screens at once. However, DisplayPort splits bandwidth between the displays. Results will vary depending on the setup.

How do I get my Dell monitor to work with my laptop? ›

If using with a laptop, plug a USB-C cable into the USB-C port (6 in the figure below). This is the cable that will connect to your laptop. If using with a desktop, plug a DisplayPort cable into DisplayPort In (4 in the figure below). This is the cable that will connect to your desktop.

If you are looking to resolve this: You may be able to enable detection, by pressing either Win + P, or Fn + F8 to select a video output display mode manually. You can disable the dGPU mode in the computers BIOS. Check you User Manual of your computer to navigate the BIOS and change the dGPU mode.

To reset a Dell monitor to factory default settings, follow these instructions: Press Button 3 on the monitor to enter the On-Screen Display (OSD) Menu. Press Button 1 or Button 2 to select Others option in the menu and press Button 3 to select.

Make sure the cable connecting your PC to your external monitor is secure. Try changing the cable connecting the external monitor. If the new one works, you know the previous cable was faulty. Try using the external monitor with a different system.

∞ S2216H: 54.61 cm (21.5 inch) viewable area display (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions.

Dell P2422H monitor is factory default set at HDMI EDID with three Block (Detailed Timing Descriptor) to support 1920 x 1080 @ 60 Hz. To display a resolution of 3840 x 1080 @ 60 Hz or lower, you need to switch the monitor HDMI EDID from three Block to two Block.